Ezgo Its Sensor. EZGO TXT/ Medalist Inductive Throttle Sensor (ITS), Fits Electric 1994 If the voltage goes to 14 volts, the sensor is faulty. The Inductive Throttle Sensor is an original equipment manufactured part designed for use on E-Z-GO Electric vehicles
However, they contain a large number of parts that may fail on you unexpectedly, such as the inductive throttle sensor. EZGO ITS Adjustment Instructions for adjusting a Inductive Throttle Sensor: Break the allen screw loose with a 5/64th allen wrench
This device can be used with 5-pin electric speed controllers and on vehicles with the DCS (Drive Control System) and PDS (Precision Drive System) controllers. To verify that the Inductive Throttle Sensor (ITS) is working correctly with the Alltrax controller you will need to measure the throttle inputs voltage at the controller and also at the ITS throttle to make sure they have the same readings. The Inductive Throttle Sensor is an original equipment manufactured part designed for use on E-Z-GO Electric vehicles
Inductive Throttle Sensor For EZGO ITS Golf Carts DCS 94+ Up TXT PDS. However, they contain a large number of parts that may fail on you unexpectedly, such as the inductive throttle sensor. This part is one you rarely see discussed but is very important to the overall performance of your cart.
EZGO ITS Sensor for TXT, DCS, and PDS Golf Carts Huskey Parts Company. EZGO ITS Throttle Problems And Adjustments Throttle Voltage Check With Alltrax Controllers To verify that the Inductive Throttle Sensor (ITS) is working correctly with the Alltrax controller you will need to measure the throttle inputs voltage at the controller and also at the ITS throttle to make sure they have the same readings The reading should be slightly above 14 volts but than 15 volts